NetApp StorageGRID Webscale SG6000 Series, Руководство пользователя

Страница: 108 / 174

Installer is running. For example, you might need to reboot the controller if the installation
fails.
About this task
This procedure only applies when the SG6000-CN controller is running the StorageGRID Appliance Installer.
Once the installation is completed, this step no longer works because the StorageGRID Appliance Installer is
no longer available.
Steps
1. From the StorageGRID Appliance Installer, click Advanced > Reboot Controller , and then select one of
these options:
◦
Select Reboot into StorageGRID to reboot the controller with the node rejoining the grid. Select this
option if you are done working in maintenance mode and are ready to return the node to normal
operation.
◦
Select Reboot into Maintenance Mode to reboot the controller with the node remaining in
maintenance mode. (This option is available only when the controller is in maintenance mode.) Select
this option if there are additional maintenance operations you need to perform on the node before
rejoining the grid.
The SG6000-CN controller is rebooted.
Maintain SG6000 appliance
You might need to perform maintenance procedures on the SG6000 appliance. The
procedures in this section assume that the appliance has already been deployed as a
Storage Node in a StorageGRID system.
To prevent service interruptions, confirm that all other Storage Nodes are connected to the grid before shutting
down the appliance or shut down the appliance during a scheduled maintenance window when periods of
service disruption are acceptable. See the information about
monitoring node connection states .
If you have ever used an ILM rule that creates only one copy of an object, you must shut down
the appliance during a scheduled maintenance window. Otherwise, you might temporarily lose
access to those objects during any maintenance procedure that takes a storage node out of
service. See the information about
managing objects with information lifecycle management .
106