Instructions for Use :
BiliCocoon™ Phototherapy System
IFU-BCC-SY-EnFr-2017-10-v13
11
EN
1. Lighting Surface
2. Cable
3. Connection
1. Lighting Surfaces
2. Cable
3. Connection
3.D Technical Features of the Disposable
Important
Never use the
BiliCocoon™ system without the BiliCocoon™ Disposable
The BiliCocoon™ Disposable is a single-use,
single-patient
device, which ensures the system cleanliness
during a phototherapy treatment. (See the
BiliCocoon™ Disposable Instructions for Use)
The BiliCocoon™ Bag Disposable is designed to be used with the BiliCocoon™ Bag Pad.
The BiliCocoon™ Nest Disposable is designed to be used with the BiliCocoon™ Nest Pad.
4 INSTALLATION AND USE
Important
Beforehand, read this manual, paying particular attention to its warnings.
Warning
The phototherapy system may increase the patient’s body temperature when it’s used in
combination with a thermotherapy system (e.g. infant incubators, infant transport incubators,
infant radiant warmers, devices supplying heat via blankets, pads or mattresses). In this case
the user should measure the infant
’s body temperature directly (i.e. on the skin’s surface)
and use the baby controlled mode of these devices, otherwise the set air temperature of the
incubator or the heater output of the radiant warmer or heated mattress has to be adjusted
according to the body temperature measurements.
Place the Light Box outside of these systems.
4.A Light Box Positioning
The BiliCocoon™ should only be used according to the described operating conditions
(see section 3.B
Light Box Features).
If the Light Box was stored under environmental conditions outside of the operating condition range, place
the Device in the proper operating conditions for at least 1 hour before using it and let its temperature
stabilize.
