Neomatica, LLC. Terminal ADM700 3G GLONASS/GPS. Ed. 7.2, dd. 24.11.2018
65
№
Command
Response
Parameters
Description
67
CARDTOIN X,Y
Example: CARDTOIN 2,0
CARDTOIN X,Y
Example: CARDTOIN 2,0
X=0,..,5
– input number;
X=255
– input number is not
defined (value is set by
default ); Y=0,..,3
– output
number; Y=255
– output data
is not defined (value is set by
default).
Setting of input number which data will be
substituted by data transmission of card number
being attached to Matrix III RD-All reader and
setting of output number which will be being
activated if the card is absent.
68
UPDATE
Start update
Firmware update via GPRS channel
69
PSTATIC X
Example:
PSTATIC 1
PSTATIC X
Example:
PSTATIC 1
X=1
— program statics
function enabled; X=0 -
program statics function
disabled
Coordinates freezing function on/off during the
parking by the program method.
70
MODE X
Example: MODE 1
MODE X
Example: MODE 1
X=0
– GPS,
X=1
– GLONASS, X=2 –
GPS
Choosing from navigation system to define
location.
71
ODM
ODM 132168181
Value of active odometer in meters
72
TRAFFIC X
Example: TRAFFIC 0
TRAFFIC X
Example: TRAFFIC 0
X=0..10.
X=0
– without grouping,
online monitoring
Setting the parameter defining data grouping to
the server before sending for saving traffic
between the tracker and the server.
73
LLS485 X,Y,Z
Example: LLS485 3,20,55
LLS485 X,Y,Z
Example: LLS485 3,20,55
X,Y,Z
– LLC sensors
addresses connected to the
tracker via the RS485
interface
Installation of LLC sensors addresses
