Neomatica, LLC. Terminal ADM700 3G GLONASS/GPS. Ed. 7.2, dd. 24.11.2018
48
⎯
install mask for needed data filtration;
⎯
press button “Apply”;
⎯
after having added all tags press “Apply settings”.
The tracker allows setting different tags for the same identifier but with different mask. Total
number of saved data bytes is 37. To view data according to set tag
use «
CANDATA
»
command or press
“Update table” button.
9.2.2 Pre-set parameters usage
«FMS tags presetting» button upload pre-set parameters into the tags table. The set of pre-
set parameters includes: fuel level, cooling liquid temperature, total fuel consumption, total engine
working time, total usage of vehicle, speed. It is important to take into account that vehicle device
of different manufactures differs and pre-set identifiers might not coincide with the identifier of a
certain vehicle. In such a case CAN bus must be scanned.
9.2.3 Available data scanning
After the scanning a whole list of identifiers being transmitted in a connected CAN bus will be
created. You may choose any identifier from this list and add it for monitoring, having changed
mask if necessary. For this you should do the following:
⎯
start CAN bus scanning proc
ess by pressing “Scan” button (“Display only tags of FMS
standard” filter keeps only those identifiers from the list that correspond to FMS standard).
⎯
choose one of identified parameters;
⎯
install “CAN” field number tag where value is transmitted to the server, (0...15);
⎯
set a mask for filtering needed data;
⎯
press
«Apply» button.
10 Extra functions settings
10.1 Cellular signal level transmission
The tracker allows transmitting measured signal level of cellular network (in per cent) instead
of any
analogue input data. «GSMSIGNAL X» command allows choosing a number of analogue
input. To do this you should activate IN_A block data transmission (analogue inputs) by using
«PROTOCOL» command or in a graphic interface of ADMConfigurator program.
10.2 Acceleration and braking values transmission
To estimate driving quality the tracker allows transmitting speed change values (km/h) in 1
