Neomatica ADM700 3G, Руководство по эксплуатации

Страница: 47 / 80

Neomatica, LLC. Terminal ADM700 3G GLONASS/GPS. Ed. 7.2, dd. 24.11.2018
47
9.2 Can bus data receipt setting
Data received from CAN bus are transmitt
ed in «CAN» data block. The transmission of such a
block should be activated by
«PROTOCOL»
command or in a graphic interface of
ADMConfigurator program. To set messages filter from CAN bus you should use
ADMConfigurator» program of version 2.1 and higher.
To set messages receipt from CAN bus do the following:
⎯
open division “Sensors” -CAN;
⎯
press “Switch on CAN”;
⎯
press
«Apply settings».
When you do the above actions there will appear a window of data receipt settings from CAN
bus. (see Figure 22).
Figure - 22 Setting of messages filter for CAN bus
9.2.1 Manual setting
For manual setting do the following:
⎯
install TAG field number “CAN” where value is transmitted to the server (0...15);
⎯
enter message identifier (ID);