Neomatica, LLC. Terminal ADM700 3G GLONASS/GPS. Ed. 7.2, dd. 24.11.2018
28
Figure 11
– Connection layout for LLS fuel level sensors based on RS-485 interface (12 +U vehicle electrical system)
7.4.2 Working with the EUROSENS DELTA RS sensor
DELTA RS sensor connection is performed with the RS-485 interface. Sensor readings are
transmitted instead of data from CAN-bus. It is necessary to activate t
he «CAN» data block with
the
«PROTOCOL»
command. It is possible to transmit all data described in the Table 2. The
command
«EUROSENSENABLED»
defines the data set requested from the sensor. It is
necessary to indicate the requested data codes and fields separating them with commas. The
repeated command rewrites the preset parameters.