![background image](http://html.mh-extra.com/html/nec/powermate-es-series/powermate-es-series_user-manual_248681080.webp)
Installing Options 4-13
Installing a Slot Cover
To install a slot cover follow these steps.
1.
Slide the slot cover back into the expansion board slot. Make sure its
narrowed end goes into the metal strap. Its top edge should fit around
the raised hole in the edge of the chassis.
Installing a Slot Cover
A – Slot Cover
2.
Replace the expansion board retainer bar (see “Replacing the
Retainer Bar”) later in this section.
3.
Replace the cover (see “Replacing the Cover” earlier in this section).