![background image](http://html.mh-extra.com/html/nec/powermate-es-series/powermate-es-series_user-manual_248681117.webp)
4-50 Installing Options
7.
Replace all devices, covers, and rails in the accessible device cage so
they are right-side up in the drive cage. Place them in the same
relative order they were in before. See the following sections for the
procedures.
!
“Storing and Retrieving Unused Rails”
!
“Replacing a Bay Cover”
!
“Installing a 5 1/4-Inch Accessible Device”
!
“Installing a 3 1/2-Inch Accessible Device”
Accessible device placement for a desktop
A – 5 1/4-Inch Bays on Top
B – 3 1/2-Inch Bracket in Lowest Bay
8.
Remove the logo plate by unclipping its tabs from inside the front
panel. Position the logo plate so it is readable when the chassis is in
the horizontal position. Press the tabs into the front panel until they
click in place.
9.
Replace the front panel (see “Replacing the Front Panel”).
10.
Replace the system unit cover (see “Replacing the Cover”).