![background image](http://html.mh-extra.com/html/nec/powermate-es-series/powermate-es-series_user-manual_248681112.webp)
Installing Options 4-45
3.
Disconnect the power and signal cables connected to all devices in
the drive bracket (see “IDE Drive Cabling”).
4.
Remove the screws that hold the drive bracket to the front of the
chassis (see the following figure).
Locating internal drive bracket screws
A – Screws
5.
Slide the bracket out of the chassis. The bracket should slide along
the guides on the side of the accessible device cage (see the following
figure).
Sliding the internal drive bracket out of the chassis
A – Guides
B – Tabs