Installing Options 4-35
Storing an unused rail
A – Front of Chassis
C – Tab at End of Rail
B – Device Rail
!
Press the rail against the wall of the bay with your thumb and press the
tab toward the center of the bay with your forefinger.
!
Slide the rail along the guides until its tab clicks in place. Release the
tab.
!
Place a bay cover over the empty bay (see “Replacing a Bay Cover”).
To retrieve a rail from an empty bay:
!
Press the rail against the wall of the bay with your thumb while you
press the tab toward the center of the bay with your forefinger.
!
When the tab releases, slide the rail out along the guide.
Removing or Installing Device Rails
The 5 1/4-inch bays are designed for use with devices that have tabbed
rails. These rails allow a device to be easily inserted and removed from
your system. If you remove a device from your system, always save the
rails, right in the bay if the bay is empty, to use on a replacement device.
!
Remove a rail by removing the two or three screws that secure it to the
side of the device.
