4-16 Installing Options
Replacing the Retainer Bar
To install the retainer bar, use the following steps.
1.
Holding the retainer bar at an angle, position its legs near the slots in
the chassis (see the following figure).
2.
Push the bar so the legs go in the slots and the top of the bar slides
under the edge of the chassis.
It may be helpful to press down on the locking tabs as the bar is
positioned.
Positioning the retainer bar
A – Retainer Bar Leg
C – Ridge on Tab
B – Slot for Retainer Bar Leg
D – Slot in Chassis
3.
Make sure the ridges on the locking tabs snap into the slots on the
edge of the chassis.
4.
Replace the cover (see “Replacing the Cover”).
