4-2 Installing Options
This chapter provides installation instructions for a variety of industry-
standard and NECC expansion options that you can add to your system.
Included in the chapter are procedures for
!
expansion board installation
!
memory module upgrade
!
processor upgrade
!
data storage device installation.
Most procedures require removal of the system’s cover. Some procedures
also require removing the front panel. Procedures for removing the cover
and front panel are both included in this chapter.
General Rules
Follow these general rules when installing system options.
!
Turn off system power and unplug the power cable.
!
Turn off and disconnect all peripherals from the front or rear of the
system.
!
When handling boards or chips, touch the system metal frame to
discharge static.
!
Do not disassemble parts other than those specified in the procedure.
!
All screws are Phillips-head unless otherwise specified.
!
Label any cable connector before disconnecting it. Note where the
connector goes and in what position it was installed.
