Configuring the System 3-13
Advanced Menu - Power Management Setup
Menu Item
Settings (default is bold)
Green PC LED Status
Dual Color, Single Color, Blinking
Select Dual-Color to show a green LED for normal
use and an orange LED for standby use.
Video Power Down
Mode
Standby, Disabled, Suspend
Select Standby or Suspend to power down the video
display as a power saving feature.
Hard Disk Power Down
Mode
Suspend, Standby, Disabled
Select Suspend or Standby to power down the hard
disk as a power saving feature.
Standby Time Out
(Minutes)
Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60
Specifies the length of time of system inactivity while
in full power on state before entering Standby state.
Suspend Time Out
(Minutes)
Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60
Specifies duration of system inactivity while in
Standby state before entering Suspend power state.
Power Button Function
Suspend, On/Off, Disabled
Suspend sets the power switch for Suspend (Sleep)
mode. With power on, pressing the switch once
places the system in sleep mode. Pressing and
holding the switch in for 4 seconds turns power off.
Restore on AC/Power
Loss
Last State, Power Off, Power On
The Power On setting automatically turns power on
after a power loss. The Power Off setting requires the
user to restart the system with the power button. The
Last State setting restores the system to the state
where it was on power loss.
Resume on Ring/LAN
Disabled, Enabled
The Enabled setting automatically reboots the system
when a signal is sent through a LAN or a modem.
