4-46 Installing Options
6.
Remove the four screws that secure the drive to the drive bracket.
Depending on the position of the drive, the screws may be located on
opposite sides of the bracket, or all on one side of the bracket.
Locating internal drive screws on the bracket
A – Screws (2 of 4)
C – Screws (all on one side)
B – Screw Holes (2 of 4)
7.
Slide the device out the front of the bracket.
8.
If you are installing a new 3 1/2-inch internal drive, see “Installing a
3 1/2-Inch Internal Drive.” If you are not installing a new drive at this
time, continue with step 9.
9.
Slide the bracket into the chassis. It should slide along the guides on
the side of the accessible device cage.
10.
Support the bracket within the chassis while you replace the screws at
the front of the chassis.
11.
Reconnect the power and signal cables of any drives still in the
bracket (see “IDE Drive Cabling”).
12.
Replace the front panel (see “Replacing the Front Panel”).
13.
Replace the system unit cover (see “Replacing the Cover”).
