NEC NP-PH1000U, Руководство пользователя

Страница: 16 / 244

2
1. Introduction

Introduction to the Projector
This section introduces you to your new projector and describes the features and controls.
Congratulations on Your Purchase of the Projector
This projector is one of the very best projectors available today. The projector enables you to project precise images up
to 500 inches (200 inches on NP25FL) across (measured diagonally) from your PC or Macintosh computer (desktop
or notebook), VCR, DVD player, or document camera.
You can use the projector on a tabletop or cart, you can use the projector to project images from behind the screen,
and the projector can be permanently mounted on a ceiling*
1
. The remote control can be used wirelessly.
*
1
Do not attempt to mount the projector on a ceiling yourself.
The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk
of bodily injury.
In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance
with any local building codes. Please consult your dealer for more information.
Features you’ll enjoy:
• DLP
®
projector with high resolution and high brightness
High resolution display – WUXGA (1920 × 1200) native resolution (16:10)
• Wide range of optional lenses selectable according to the place of installation
This projector supports 5 types of optional lenses, providing a selection of lenses adapted for a variety of installation
requirements.
In addition, the lenses can be mounted and removed easily.
Note that no lens is mounted upon shipment from the factory. Please purchase optional lenses separately.
• Dual Lamp system
Two lamp system offers increased lamp life and energy savings along with redundancy.
• Double stackable for built in redundancy and high light output requirements
Double stacking projectors increase the brightness and visibility.
• Powered Lens Shift, Zoom, and Focus offer installation flexibility
Powered Horizontal and Vertical lens shift provides the ability to project from off center screen installations. Powered
zoom and focus provide quick and easy adjustment.
Note that focus can be adjusted manually on the NP25FL lens.
• Wide range of input/output connectors (HDMI, DisplayPort, BNC, etc.)
The projector is equipped with a variety of input/output connectors: computer (analog), 5 BNC, HDMI, DisplayPort,
Video, S-Video, etc. (The computer (analog) and BNC connectors also support component inputs.)
The projector’s HDMI and DisplayPort input connectors support HDCP.
• Slot for optional board
The projector has a slot for the optional board (SB-01HC or other NEC’s interface boards).
• High picture quality processing circuit
IDT HQV processing technology is used to project high quality images.
• Energy-saving design with a standby power consumption of 0.5 Watts or less
When the on-screen menu’s standby mode is set to “Power Saving”, the power consumption in the standby mode
is 0.5 W.
• “Eco mode” for low power consumption and “Carbon Meter” display
The projector is equipped with an “eco mode” for reducing power consumption during use. Furthermore, the
power-saving effect when the eco mode is set is converted into the amount of reductions of CO
2
emissions and