NEC N8400-086F, Руководство пользователя

Страница: 261 / 294

Installing the Operating System B-43
9.
Refer to the following procedure to set the team member adapter priority status.
– Set Primary
Point the adapter and click [Set Primary] button.
– Set Secondary
Point the adapter and click [Set Secondary] button.
NOTE:
Adapter priority config can be confirmed by the following
procedure
1. Click [TEAM:"Team name"] from [Device manager]
→
[Network
adapters].
2. Click [Settings] and confirm Adapters in team list.
10.
Click [Test Switch]
→
[Run test] to confirm the adapter team is properly setup.
Confirm the result in [Test results]
11.
Reboot the system.
Remove Team
This procedure is common in Windows Server 2003 and Windows Server 2008.
1.
Open the [Device Manager].
2.
Click [Network adapters], and open [TEAM:"Team name"] properties.
3.
Click [Setting] tab.
4.
Click [Remove Team] button.
5.
Click [Yes] to the message.
6.
Confirm [TEAM:"Team name"] adapter in not existing in [Network adapters] tree and
reboot the system.