2. Procedures after Completion of Installation
Express5800/R320g-E4,
R320g-M4
Installation Guide (VMware)
66
Chapter 1 Installing Operating System
2.3
Precautions for Changing the Configuration after Setup
If the network configuration has been changed after completing the setup, run the following command.
Important Configuration should be changed after setup is complete. If the configuration is
changed during setup, it can cause an unexpected behavior.
If the network settings of the ESXi host or root user password has been
changed
The process that runs on ftSys Management Appliance manages duplication by connecting with ESXi host.
If IP address or hostname of ESXi host, root user password has been changed, the process running on ftSys
Management Appliance will be unable to login to ESXi host.
Perform the following settings
1. Log in to ftSys Management Appliance as a root user.
2. Run the
configure-appliance
command. Then, enter the IP address or hostname of ESXi host, root
user name, and root user’s password.
# /opt/ft/sbin/configure-appliance
Note
Execution example: When the IP address of log server is 192.168.0.7:
# /opt/ft/sbin/configure-appliance
Enter
Name or IP address of the host ftServer
, [192.168.0.7]:
Enter
Administrative user
for 192.168.0.7, [root]:
Enter
Administrative password
for 192.168.0.7 []:
All entries have been removed successfully.
Created user ftsysuser successfully.
:
configure-appliance: Verifying permissions on the host system
:
Multiple paths to storage
[PASS]
Network Configuration
[PASS]
Host ftSys service started
[PASS]
Host logs available after reboot
[PASS]
DNS Configuration
[PASS]
3. After running the command, reboot ftSys Management Appliance.
Restart the virtual machine from Host Client, or run the following command.
# shutdown -r now
