1. Setup Procedure
Express5800/R320g-E4, R320g-M4 Installation Guide (VMware)
37
Chapter 1 Installing Operating System
– Follow the steps below when enabling an SSH connection to the ESXi host.
1. Select [Troubleshooting Options] and press
Enter
.
2. Select [Enable SSH] and press
Enter
to change the setting from [SSH is Disabled] to [SSH is Enabled].
3. Press
ESC
to return to the [System Customization] menu.
Press
ESC
to log out.
Important Do not change the network configuration that is created at installation of the ESXi
host before the setup procedure described in this guide completes.
If you need to add standard switch, perform it after setup process completes.
Note
Set [Configuration Management Network] and [Troubleshooting Options] according to your
environment.
Tips
If IPv6 is disabled in Configure Management Network, the system reboots automatically.
