1. Setup Procedure
Express5800/R320g-E4,
R320g-M4
Installation Guide (VMware)
22
Chapter 1 Installing Operating System
9. Make sure that
PCI Slot x Option ROM
for the PCI slot in which Fibre Channel card is installed shows
Enabled
, and all other items show
Disabled
.
This is the end of steps for enabling Fibre Channel card. Press the ESC key two times to return to the
previous screen.
10. Change “Boot Mode” Setting, because it’s necessary to be set HBA configuration by next step.
When you move the cursor onto “Boot”, the Boot menu appears.
Move the cursor onto "Boot Mode" and press
Enter
.
Parameters will be dislayed. Select "Legacy" and press
Enter
.
11. It continues to disable OS boot monitoring Function.
Proceed to
"Chapter 1 (1.5 Disabling OS Boot Monitoring Function)"
to continue setup.
