1. POST Error Message
Express5800/R120e-1M, R120e-2M Maintenance Guide
123
Chapter 3 Appendix
1.
POST Error Message
When an error is detected by POST, the display shows an error message. In addition, depending on the error
contents, your server might beep to report that an error occurred.
System Monitoring Check
... Passed
ERROR
AE81: CPU1_DIMM1 with error is enabled.
AE01: CPU1_DIMM1 has been disabled.
AE02: CPU1_DIMM2 has been disabled.
Press <F1> to resume, <F2> to setup
Messages indicating a memory error
(in this example, the message indicates
that CPU1_DIMM1 and CPU1_DIMM2
have failed, and that DIMM1 has been
forcibly started up)
The following table lists error messages and the actions to take in response to them.
Tips
•
Write down the displayed messages and beep patterns before contacting your
sales representative. Alarm messages are useful information for maintenance.
•
The list only contains messages for the server. For details about error messages
of optional devices, and the actions to take, refer to thewith each product.
