1. POST Error Message
Express5800/R120e-1M, R120e-2M Maintenance Guide
133
Chapter 3 Appendix
(3) Error messages on a virtual LCD
In EXPRESSSCOPE Engine 3 web browser window, you can confirm virtual LCD error messages (for details on
the virtual LCD, refer to "
EXPRESSSCOPE Engine 3 User’s Guide
").
The table below shows the error messages displayed on upper and lower lines, cause, and solution.
•
Messages displayed on an upper LCD line
BIOS Message
on Upper LCD Line
Cause Solution
XX POST Started
Displayed while POST is running.
"XX" denotes POST code that is
running.
XX BIOS Rev YYYY
Displayed while POST is running.
"XX" denotes POST code that is
running, and "YYYY" denotes
system BIOS version.
POST Completed
Successfully
Displayed when POST completes
normally.
This is not an error.
POST ERROR XXXX
Error XXXX was detected during
POST.
Check the message displayed on LCD, and take an
appropriate action.
No Available Memory in
System
No available memory is
implemented.
Make sure that the memory is correctly
implemented.
Error Pause in POST
POST detected an error and
paused.
Check the message displayed on LCD, and take an
appropriate action.
Entering BIOS SETUP MENU
Starting up BIOS SETUP MENU.
This is not an error. This message will disappear
when SETUP operation is completed.
Waiting for normal
temperature
A temperature abnormality was
detected inside the server.
Lower the room temperature or turn off the power to
cool the server to room temperature before starting
up the server. If this abnormality continues to occur,
check if a fan has failed. If the same error still
continues to occur, contact your representative.
BIOS Recovery Running
BIOS recovery is in progress.
BIOS Updater Running
BIOS update is in progress.
This is not an error. Wait until BIOS update is
completed.
System Configuration
change is detected
The CPU or memory configuration
has changed since the previous
startup.
If this message appears even when no configuration
change has been made, contact your sales
representative
PCI Bus System Error 1
A system error was detected in
PCI bus.
PCI Bus Parity Error 1
A parity error was detected in PCI
bus.
CPUx_DIMMx Correctable
Error (x: DIMM number)
A frequent occurrence of
correctable memory error was
detected.
Memory DIMM Sparing
Fail-over on CPUx (x:
CPU socket number)
Memory Sparing feature failed
over to standby memory.
Memory Mirroring
Fail-over on CPUx (x:
socket number)
Memory Mirroring feature failed
over to standby memory.
Contact your sales representative.
Message displayed on
upper LCD line
Message sent from BIOS
Message displayed on lower
LCD line
Message sent from BMC
