7. Resetting and Clearing the Server
Express5800/R120e-1M, R120e-2M Maintenance Guide
46
Chapter 1 Maintenance
7.
Resetting and Clearing the Server
See this section if the server does not work or if you want to recover the BIOS settings to the factory settings.
7.1
Software Reset
If the server halts before starting the OS, press <Ctrl> + <Delete> + <Alt> keys. The software reset clears all
the data in progress in memory, and restarts the server.
Note
To reset the server when it does not halt, make sure that no processing is in
progress
7.2
BMC Reset
Press BMC RESET Switch only if a problem occurs in EXPRESSSCOPE Engine 3 (BMC).
Do not press BMC RESET Switch in usual operation.
To reset the BMC, press BMC RESET Switch at least five seconds. Remote management feature is disabled
for about 2 minutes after BMC is reset.
Note
Do not shutdown the system, reboot the system, or perform any switch operation
after pressing the BMC Reset switch for approximately 2 minutes.
Tips
BMC RESET Switch cannot reboot the server.
