8. System Diagnostics
Express5800/R120e-1M, R120e-2M Maintenance Guide
52
Chapter 1 Maintenance
8.
System Diagnostics
The System Diagnostics runs several tests on the server.
8.1
Test Items
The following items are tested in System Diagnostics
•
Memory
•
CPU cache memory
•
Hard disk drive
Important Before executing the System Diagnostics, be sure to disconnect the LAN
cable. Executing the System Diagnostics with the LAN cable connected may
affect the network.
Tips
No data is written to the disk on checking hard disk drives.
8.2
Startup and Exit of System Diagnostics
Start up System Diagnostics in the following procedure. If the server is running, shutdown the system.
1. Start up EXPRESSBUILDER and select
Tool menu
from Boot menu.
For information on starting up EXPRESSBUILDER, see
Chapter 2 (5. Details of EXPRESSBUILDER)
.
Note
In case
Language Selection menu
appears, select
English
.
If " Hit key to continue. [y|Y] " is displayed in
Redirection mode
, press <y> key (or
<Y> key).
2. Select
Test and diagnostics
.
End-User Mode
(Basic)
to start System Diagnostics. This process takes about three minutes.
When the diagnostics is completed, the screen display changes as shown below.
See
eupro_ug_en.pdf
in the ¥isolinux¥diag folder of EXPRESSBUILDER for the
End-User
Mode (Professional)
feature.
