1. POST Error Message
Express5800/E120f-M Maintenance Guide
143
Chapter 3 Appendix
BMC Message on Lower LCD Line
Cause
Solution
CPU2-DIMM Area Temperature Upper
Non-Critical
CPU2-DIMM Area Temperature Lower
Critical
CPU2-DIMM Area Temperature Upper
Critical
Processor1 Thermal Control Upper
Non-Critical
Processor1 Thermal Control Upper
Critical
Processor2 Thermal Control Upper
Non-Critical
Processor2 Thermal Control Upper
Critical
DUMP Request !
The dump button was pressed.
Wait until collecting the memory dump
data has finished.
OS shutdown Alm
An OS stop error occurred.
Write down the displayed message,
wait until collecting the memory dump
data has finished, and then contact
your sales representative.
Power Supply1 Failure detected
A power supply unit abnormality
occurred.
Make sure that the power cord is
plugged in. If this does not resolve the
problem, contact your sales
representative.
Power Supply2 Failure detected
Processor Missing
No CPU is installed.
Contact your sales representative.
Processor1 Thermal Trip
The power was forcibly turned off
due to a CPU temperature
abnormality.
Processor2 Thermal Trip
Chip Set Thermal Trip
The power was forcibly turned off
due to an abnormal temperature
of chipset.
CPU1-DIMM1 Uncorrectable Error
An unrecoverable error occurred
for CPU1-DIMM1.
CPU1-DIMM2 Uncorrectable Error
An unrecoverable error occurred
for CPU1-DIMM2.
CPU1-DIMM3 Uncorrectable Error
An unrecoverable error occurred
for CPU1-DIMM3.
CPU1-DIMM4 Uncorrectable Error
An uncorrectable error occurred
for CPU1-DIMM4.
CPU1-DIMM5 Uncorrectable Error
An unrecoverable error occurred
for CPU1-DIMM5.
