NEC 78K0/KB1+ Скачать руководство пользователя страница 396

Страница: 396 / 405

APPENDIX A DEVELOPMENT TOOLS

Preliminary User’s Manual U16846EJ1V0UD

396

A.5.2 When using in-circuit emulator IE-78K0K1-ET

Caution The oscillation frequency is up to 10 MHz when the IE-78K0K1-ET is used.

IE-78K0K1-ET

Note

In-circuit emulator

The in-circuit emulator serves to debug hardware and software when developing

application systems using a 78K0/Kx1 or 78K0/Kx1+ product. It corresponds to the

integrated debugger (ID78K0-NS). This emulator should be used in combination with a

power supply unit, emulation probe, and the interface adapter required to connect this

emulator to the host machine.

IE-70000-98-IF-C

Interface adapter

This adapter is required when using a PC-9800 series computer (except notebook type)

as the host machine (C bus compatible).

IE-70000-CD-IF-A

PC card interface

This is PC card and interface cable required when using a notebook-type computer as

the host machine (PCMCIA socket compatible).

IE-70000-PC-IF-C

Interface adapter

This adapter is required when using an IBM PC compatible computer as the host

machine (ISA bus compatible).

IE-70000-PCI-IF-A

Interface adapter

This adapter is required when using a computer with a PCI bus as the host machine.

This is supplied with IE-78K0K1-ET.

NP-30MC

Emulation probe

This probe is used to connect the in-circuit emulator to the target system and is designed

for use with a 30-pin plastic SSOP (MC-5A4 type).

NSPACK30BK

YSPACK30BK

HSPACK30BK

YQ-Guide

Conversion socket

This conversion socket connects the NP-30MC to a target system board designed to

mount a 30-pin plastic SSOP (MC-5A4 type).

•

NSPACK30BK: Socket for connecting target

•

YSPACK30BK: Socket for connecting emulator

•

HSPACK30BK: Cover for mounting device

•

YQ-Guide:

Guide pin

Note IE-78K0K1-ET is supplied with a power supply unit and PCI bus interface adapter IE-70000-PCI-IF-A. It is

also supplied with integrated debugger ID78K0-NS and a device file as control software.

Remarks 1. NP-30MC is a product of Naito Densei Machida Mfg. Co., Ltd.

TEL: +81-45-475-4191 Naito Densei Machida Mfg. Co., Ltd.

NSPACK30BK, YSPACK30BK, HSPACK30BK, and YQ-Guide are products of TOKYO ELETECH

CORPORATION.

For further information, contact Daimaru Kogyo Co., Ltd.

Tokyo Electronics Department (TEL: +81-3-3820-7112)

Osaka Electronics Department (TEL: +81-6-6244-6672)

A.5.3 When using in-circuit emulator IECUBE for 78K0/Kx1+ (name pending)

IECUBE for 78K0/Kx1+ (name

pending)

Notes 1, 2

In-circuit emulator

The in-circuit emulator serves to debug hardware and software when developing

application systems using a 78K0/Kx1+ product. It corresponds to the integrated

debugger (ID78K0-NS). This emulator should be used in combination with a power

supply unit and emulation probe. Use USB to connect this emulator to the host machine.

Emulation probe for MC package

Note 2

(part number pending)

This probe is used to connect the in-circuit emulator and target system, and is designed

for a 30-pin plastic SSOP (MC-5A4 type).

Notes 1. IECUBE for 78K0/Kx1+ (name pending) is supplied with a power supply unit. It is also supplied with

integrated debugger ID78K0-NS and a device file as control software.

2. Under

development

Содержание 78K0/KB1+






















































































































































































































































































































































































































Результаты поиска

Содержание 78K0/KB1+

Отзывы:

Похожие инструкции для 78K0/KB1+

Бренды по названию

Популярные бренды

NEC 78K0/KB1+, Предварительное руководство пользователя

Результаты поиска

Содержание 78K0/KB1+

Отзывы:

Похожие инструкции для 78K0/KB1+

Бренды по названию

Популярные бренды