26
|
ni.com | Getting Started with NI 9512 Modules and AKD Servo Drives
5.
Configure the command source and operation mode.
a.
Open the
Settings
page and set the
Operation Mode
to
2 - Position Mode
.
b.
Set the
Command Source
to
2 - Electronic Gearing
.
Note
You must set the
Operation Mode
before setting the
Command Source
or
AKD WorkBench returns an error.
When you have updated these settings, the
Settings
page should look similar to Figure 18.
Figure 18.
AKD WorkBench Settings Page
Содержание NI 9512 C Series
Страница 1: ...NI 9512...