NAiS EBL512, Руководство по эксплуатации

Страница: 59 / 116

Matsushita Electric Works Fire & Security Technology AB
MEW00442 Rev: - Operating Instructions EBL512, V1.44.x
57
22 Access
To be able to use the key pad in the control unit (to get access to the
menu tree), it is necessary to login with an access code for level 2 ,3
or 4.
See also chapter "Access levels", page 17.
Open the door in the control unit (= level 1), push the "Access" button
(P8) and continue as follows:
Explanations:
Action (in the table) = use push button / key (e.g. signed "Access").
Text in display (in the table) = what is shown in the display in the
control unit..
Use "
↑
" and "
↓
" to scroll between the main menus H1-H9.
Use "A" to accept.
Some main menus have sub menus. Use "
↑
" and "
↓
" to scroll
between the sub menus (e.g. B1-B9). Use "A" to accept.
If, instead of a menu identification (e.g. B1), the letter L is shown, it
means that it is a List. Use "
↑
" and "
↓
" to scroll in the list.
Use "
←
" and "
→
" to move the cursor in a menu.
Use "Return" to return from a sub menu to the main menu (H1-H9).
Use "Return" to logout from a main menu (H1-H9).
There will be an automatic logout 10 minutes after the last action (i.e.
if the key pad / a push button is not being used for 10 min.).
Action Text in display Comments
"Access"
Access code: _
Enter the code (4 digits)
Access code:
∗∗∗∗
The digits are replaced
(
∗∗∗∗
) in the display.
NO ACCESS!
The access code was not
correct. Try again.
Perform monthly test
ACCEPT? H1
The access code was
correct. This is menu H1.
Push "A" to accept (to
perform monthly test)
or
scroll to the following
menus (H2-H9).