Mylex Disk Array controller Software Kit 2.01, Руководство по установке и инструкция пользователя

Страница: 97 / 172

SCO UNIX
Manual No. 771929 4-13
4
S
C
O
U
N
I
X
Global Array Manager Server Software and
Utilities for SCO UNIX
Installing Global Array Manager Server and Utilities
Software
Use pkgadd to install the Global Array Manager Server software for SCO
UNIX. Complete the following procedure.
☛
Note
These instructions assume the installation diskette is
in the first diskette drive. If a different source is used,
substitute the location for “/dev/rfd0” below.
1. Log in as root.
2. Insert the GAM Server diskette for SCO UNIX in the file server’s
diskette drive.
3. Type the following (match case exactly as shown):
pkgadd -d /dev/rfd0 GAM
↵
The files are copied. The Kernel is rebuilt.
4. A prompt to boot this Kernel by default is shown:
Do you want this kernel to boot by default? (y/n)
Select “y” to boot from this Kernel.
5. You are prompted to rebuild the Kernel environment as shown:
Do you want the kernel environment rebuilt? (y/n)
Select “y”.
6. Installation is complete.
• Modify the GAMEVENT and GAMEVLOG lines manually. Do this
by editing the S99GAM file found in the directory /etc/rc2.d,
changing the GAMEVENT line to include (after each
-h
parameter)
the IP addresses of the client systems you will use with this server.
Modify the pathname and filename in the GAMEVLOG command
line if you wish to.