Mylex Disk Array controller Software Kit 2.01, Руководство по установке и инструкция пользователя

Страница: 36 / 172

Global Array Manager (GAM)Server Software for NetWare 4.11/4.2 and 5.0
2-16 Disk Array Controller Software Kit User’s Manual
Loading Global Array Manager Server Manually
The Global Array Manager Server can be loaded manually from the
NetWare server console prompt (:). Type the following two commands in
sequence:
load gamserv
↵
load gamevent -h <IP Address of Client> (repeat...)
Remember that you will need to edit the IP address line. See “Enabling the
Event Comment Line” on page 2-16 to add an IP address line, as needed.
Loading Global Array Manager Server Automatically
The Global Array Manager Server can be custom-made to start up
automatically on a NetWare server, when the NetWare server is restarted
after installation of Global Array Manager. This capability will be available
because the following two files will be automatically copied into
AUTOEXEC.NCF, at the end of the file, during the GAM installation.
load gamserv
load gamevent -h <IP Address of Client> (repeat...)
Remember that you will need to edit the IP address line. See “Enabling the
Event Comment Line” on page 2-16 to add an IP address line, as needed.
Enabling the Event Comment Line
To enable event notification to GAM Clients, both local and remote, add
“-h DNS_NAME” or “-h IP_NUMBER” to the end of the line below for
each GAM Client and uncomment the line. DNS_NAME and IP_NUMBER
are the workstation’s Computer Name or IP Address. You can add up to 50
clients.
Usage:
-h <address> : : Sets address as a receiver of events. Address may be an IP
address or a network node name.