Mylex Disk Array controller Software Kit 2.01, Руководство по установке и инструкция пользователя

Страница: 159 / 172

RAID Fault Management
Manual No. 771929 C-5
A
P
P
E
N
D
I
C
E
S
C
Running RAIDBLD
The default RAIDBLD command line is set to do the following when
RAIDBLD runs:
• Use a scan interval of seven (7) seconds [-s 7];
• Scan for failed hot spares only [-S 1]
• Perform automatic rebuilds when failed drives are replaced [-r];
• Perform automatic consistency checks beginning tonight at midnight
[-T 0], every midnight [-t 24], but do not automatically fix consistency
errors [-R 1];
• Log RAIDBLD messages to a specified log file,
[-l [pathname] raidbld.log];
• Do NOT specify a console device to display RAIDBLD messages
(-c parameter not set).
Param Value(s) / Default / Example Description
-T Values = 0 = 12:00 A.M.
...to...
23 = 11:00 P.M.
Default = -T 0
Example = raidbld -T 19
Set Start Time For Background
Consistency Check: If you wish to
run automatic consistency checks,
use this parameter to specify the
time of day (on the hour only) to
begin the first consistency check.
To turn OFF the automatic
consistency check function, remove
the -R parameter and its value.
-t Values = 1,2,3,4, etc.
Default = -t 24
Example = raidbld -t 12
Set Interval Between Background
Consistency Checks: If you wish
to run multiple, ongoing consistency
checks, specify the time interval (in
hours) between the end of one
consistency check and the start of
the next one. To turn OFF the
automatic consistency check
function, remove the -R parameter
and its value.
Table C-1. Command Line Parameters and Their Functions