Mylex Disk Array controller Software Kit 2.01, Руководство по установке и инструкция пользователя

Страница: 28 / 172

Mylex Disk Array Controller Driver for NetWare 5.0
2-8 Disk Array Controller Software Kit User’s Manual
4. Watch for the status screen that displays the drivers found for storage
adapters:
• Select Modify
• Select Storage Adapters
• Delete the MDAC.HAM line entries
5. Press the Insert key two times in order to add new drivers from another
source. Insert the NT/NW Drivers Software Kit distribution diskette
into the floppy disk drive when the installation program prompts you to
insert the vendor-supplied disk. The installation program will scan the
diskette for all available drivers. Select the NetWare 5.0 driver from the
list.
MDAC.HAM
• Select the appropriate location for the new drivers (e.g. floppy, etc.).
• Press Return.
• MDAC.HAM will be added from Software Kit 2.01.
6. Return to the driver summary by pressing the arrow keys and select the
option to continue.
7. NetWare 5.0 will continue the installation.
8. Watch for another status screen that displays the storage devices
(i.e., SCSIHD.CDM and SCSICD.CDM) and the network drivers:
• Select Modify
• Select Storage Devices
• Press the Insert key
• Select NWASPI.CDM (this driver is required to load GAM)
• Press Enter
• Return to the driver summary by using the arrow keys.
Installing Peripherals Under NetWare 5.0
Non-disk peripheral devices, such as tape or CD-ROM drives, can be
installed on any channel of the controller. Each disk or non-disk device will
require a unique SCSI ID, different from any other device connected to the
controller, regardless of the channel.