MUTOH Toucan Hybrid PJ-162-FE, Руководство пользователя

Страница: 65 / 251

User’s Guide – Toucan Hybrid
65 AP-750, Rev. 1.1 –- 23/04/04
*Check maintenance
Motor [CR PF LV UD]
Motor [Takeup Send]
Head [KCcMmY]
Step 8 :
After confirming the removal of the print head cap, push the [ENTER] key on the operation panel.
Notes :
The initialization of the hard disk which is installed to the unit is performed for about
10 seconds after 3 seconds from the launch of the initial start-up operation. During
this operation :
•
The operation panel will not work even if pushing [ENTER] key.
•
The display will not change even if the parts’ life cycle is displayed.
Step 9 :
After finishing initial startup operations, the unit will enter the normal operating condition.
Notes :
If there are any problems during the initial startup operation, the unit will display a
message on the operation panel, and the operation may stop. If the operation stops,
refer to "Troubleshooting", and take the appropriate measures.
Step 10 :
Keep the print head cap in the accessories box an close to the lid.
No. Name
1 Print head cap
2 Accessories box
3 Lid