MUTOH Toucan Hybrid PJ-162-FE, Руководство пользователя

Страница: 211 / 251

User’s Guide – Toucan Hybrid
211 AP-750, Rev. 1.1 –- 23/04/04
6.2.2 Replacing roll media
Read the following for information on when and how to replace roll media.
(1) Replacement time
Replace roll media under the following conditions.
1. When the roll media loaded in the printer comes to an end
The following message is displayed on the operation panel.
If the media comes to an end while printing, the printer stops printing.
End Of Roll
Cancel LeverUp
Feed&Reel Purge
User 1 43 m
When you want to change the type of media
(2) Types
Notes :
For types and details of roll media, refer to the following.
Options/Supply list
(3) Replacement procedure
Follow the steps below to replace roll media.
Step 1 : If the printer is turned on, make sure of the following
Printing or other operations are not performed.
Make sure that the display on the operation panel shows the normal state.
Make sure that the MEDIA SET lamp is lit (green) on the operation panel.
Step 2 : Remove the roll media from the media feed slot and the tension roller
No. Name
1 Media feed slot
2 Tension roller
3 Roll media