MUTOH Toucan Hybrid PJ-162-FE, Руководство пользователя

Страница: 182 / 251

User’s Guide – Toucan Hybrid
182 AP-750, Rev. 1.1 –- 23/04/04
5.5.42 Write mode menu
Set writing method of printing data to the hard disk and printing method.
Notes :
• Write mode menu can be set when the hard disk is installed.
• Before writing the print mode on the hard disk, always set the media. When changing
the printing start position (zero position), set the zero position. Refer to “Origin setup
menu”
The printing data is processed according to the media size and the printing start position.
Printing data cannot be written unless the media is set.
* WriteMode *
F1
→
Off Write.Prn
←
F2
F3
→
Write > Prn WriteOnly
←
F4
- Off - (1/1)
Setup Items Parameters Descriptions
<OFF> No writing to the hard disk. Perform printing immediately
Write/Prn Prints while writing the data to the hard disk
Write>Prn Prints after writing the data tot the hard disk
Write only Writes the data to the hard disk without printing
Notes:
• Printing method can be set for
printing data saved in the hard disk by
Re-plot menu.
→
Reprint menu
Write Mode
- After setting, shift to the previous hierarchy menu.
→
File management setup menu
5.5.43 Reprint menu
Set following items when you want to draw printing data saved in the hard disk.
• File name
• Printing media number
Notes :
• Re-plot menu can be set when hard disks are installed.
• When the plotting data is re-plotted, use the same media as used when writing plotting
data.
Regardless the size of the set media, the plotted data is plotted in the same size as for
the original media.
* Reprint *
F1
→ ←
TEMPFILE000 +
←
F2
F3
→ →
0 num -
←
F4
SELECT
→
ENTER