MUTOH Toucan Hybrid PJ-162-FE, Руководство пользователя

Страница: 25 / 251

User’s Guide – Toucan Hybrid
25 AP-750, Rev. 1.1 –- 23/04/04
Do not leave unattended when operating
A label on the machine should also warn operators and technicians that the machine should not operate
when not attended.
DO NOT LEAVE UNATTENDED
In case media touches the infrared lamp and / or the lamp house
Due to the high temperature of the lamp house and the lamp, the media may melt or sear when it is in
contact with the lamp or lamp house for some time. When the head stops due to a media crash the Toucan
Hybrid should be shut down.
DO NOT TOUCH THE CARRIAGE, NOR THE LAMP HOUSE. The lamp house heats up to 150 °C (302F),
touching it could cause severe burns.
When a media crash occurs, the lamp will hold still above the media which can melt or sear. Please perform
a power off and a power on so the carriage moves back to the capping station automatically.
Use the Toucan Hybrid in a well ventilated area
Be aware that poisonous fumes may be released in little concentrations when media gets seared. Due to the
infrared lamp, solvents evaporate much faster, so it is highly recommended to use an air purification system.
Mechanical hazard due to moving print head carriage
You can get hurt due to the movement of the carriage. Do not touch the lamp house or the carriage while it is
moving.
Do not stare in the laser beam.
A label on the machine should also warn operators and technicians not to stare in the laser beam without
wearing protective goggles.
WARNING
HAZARDOUS MOVING PARTS
KEEP FINGERS AND OTHER BODY PARTS AWAY