MUTOH Toucan Hybrid PJ-162-FE, Руководство пользователя

Страница: 57 / 251

User’s Guide – Toucan Hybrid
57 AP-750, Rev. 1.1 –- 23/04/04
Important :
Do not attempt to plug in electrical plugs with wet hands. Doing so may result
in electrical shock.
Be sure to use the specified voltage (AC 100V-120V/220V-240V). Otherwise,
electrical shock or fire may occur.
Use electricity directly from a power outlet (AC 100V-120V/220V-240V). Do not
put many loads on one electrical output. Otherwise, heat may be generated
and cause fire.
Be sure to use an outlet with an earth terminal, and use the terminal correctly.
Otherwise, electrical shock or fire may occur.
Do not connect earth cables in the following areas.
•
Gas pipes
→
Doing so may cause fire or an explosion.
•
Earth terminals for telephone lines or lightening rods
→
Doing so
may cause a large flow of voltage if lightening occurs.
•
Water pipes or faucets
→
If there is a plastic part in the pipe, the
earth will not work correctly.
Caution :
Follow the instructions below when handling the power plug. Otherwise, fire may
occur.
•
Wipe away dust and any other residue before inserting the plug.
•
Ensure that the plug is firmly inserted as far as it will go.
Ensure that the plug has been disconnected from the power socket when it is not to
be used for a long time.
Earth wires must be connected to wires or terminals that fulfill the conditions below.
•
Earth terminals of power socket
•
Earth wires with copper morsel which at least 650 mm under ground
Notes :
If you cannot use earth terminals or find any of them, contact the shop where you
bought your printer.
Do not unplug the power cable when the printer is on. If power cable is unplugged,
leave the printer for at least 1 minute before plugging the cable in again.
No. Name
1 Power cable