MUTOH Toucan Hybrid PJ-162-FE, Руководство пользователя

Страница: 245 / 251

User’s Guide – Toucan Hybrid
245 AP-750, Rev. 1.1 –- 23/04/04
8 APPENDIX
8.1 INTRODUCTION
This section explains the specifications, optional parts and supplies, installation procedures for optional
parts, and user support for this printer.
8.2 PRODUCT SPECIFICATIONS
8.2.1 TOUCAN HYBRID Unit specification
Item
Specifications
Model name TOUCAN HYBRID
Printing method Piezo inkjet
Head gap
adjustment (Roll
media) Three levels
Low / Normal / High (2,5 mm / 3,0 mm / 3,5 mm)
Printhead
unit
Head gap
adjustment (Rigid
media) Stepless adjustment between 4 mm and 75 mm by UP/DOWN
movement of jack
Drive method Firmware servo / DC motor drive
Media feed method Multi-point pressure grid roller method
Media fixing method Pressurizing roller auto-down method
Media supply and discharge Back feeding / front paper discharge
Winding unit Arm type sensor detects slack of paper and takes up the slack
Feed unit Arm type sensor detects bracing (hang-up) of paper and feeds out the
paper
External 250mm (9.8 in.) or less
Weight 100 kg (220 Lbs.) or less
Rigid media
specifications
Thickness 1.0mm or less when dial 000, otherwise adjust.
External Width : 1626mm or less
Length : 3000mm or less
Thickness : 70 mm or less
Weight 30kg (66 Lbs.) or Less
Roll media
specifications
Thickness 70.0mm (2.8in.) or less
Max. media width 1626 mm (64.0in.)
Roll-to-roll 1570 mm Max. print width
Rigid material 1470 mm (guranteed quality)
1570 mm (printable quality)
Roll-to-roll Back: 0-50 mm , Left, right: 25,4 mm (1 inch) printing margins
Rigid material Front: 0, Back:0, Left, right: 25,4 mm (1 inch)
Media cut method
(only in roll-to-roll) Manual cut
Head height adjustment Three levels: Low / Normal / High
CPU 64 Bit RISC CPU,
Memory 128MB
Commands MH-RTL
(RTL-PASS)
Interface • Standard: bi-directional Centronics method (IEEE1284 compliant;
compatible, nibble, ECP mode)