Operating instruction: O003 / 5759
Edition: 04/2019
Reproduction, duplication of this document - even a partial form –
are subject to our permission. All rights reserved.
In this data sheet any liability for changes, errors or misprints is excluded.
27
Starting the pressing process
After the ready message appears, key (Start/Stop) is to be activated
.
The pressing process is now
working automatically as follows:
Phase 1:
Both heating plates are heated up to the desired set temperature.
The set and actual temperature of both heating plates can be displayed using key ( ) instead of
the marquee text in the second line.
The hold-down time starts as soon as both heating plates have reached their respective set temper-
ature.
Phase 2:
The temperature of both heating plates is kept at the set value for the programmed hold-down time.
The remaining pressing time appears in the first line.
The set and actual temperatures of both heating plates can be displayed using key ( ) instead of
the marquee text in the second line. The programmed hold-down time can be displayed in the first
line by pressing ( ).
When the hold-down time has expired the "cooling" output is activated and both heaters are
switched off, provided that the desired press-type supports a cooling process and the set cooling
temperature is >0°C.
Warning
Risk of injury from burns. The heating plates can get very hot during heating process (up
to 210°C) Touching them without any protection leads to burns.
Heating up . . . . . . . .
Heating up . . . . . . . .
Heating up . . . . . . . .
Holding
