Operating instruction: O003 / 5759
Edition: 04/2019
Reproduction, duplication of this document - even a partial form –
are subject to our permission. All rights reserved.
In this data sheet any liability for changes, errors or misprints is excluded.
17
Warning
Risk of crushing when closing the heating press!
5.3
Closing the heating press
1. Flap the eye bolt with collar nut from the bottom
up.
2. Slightly tighten nut by hand.
5.4
Connecting the heating press to the mains
1. Connect the top heating plate with the bottom heating
plate, so that the latching gets closed.
2. Connect the heating press to the mains.
Attention
Risk of fire or damage because of overloaded elec-
tricity supply. Please observe the electricity supply
for the heating press mentioned on the type plate!
If necessary, make sure the heating press has a
separate electricity supply.
Please connect power supply only when top and
bottom heating plates had been interconnected!
Collar
nut
Eye bolt
Centering pin
Centering bore
