Operating instruction: O003 / 5759
Edition: 04/2019
Reproduction, duplication of this document - even a partial form –
are subject to our permission. All rights reserved.
In this data sheet any liability for changes, errors or misprints is excluded.
18
Note:
The compress air supply gets automatically regulated by
an integrated compressor. The permissible air pressure of
2 bar is factory adjusted and may be changed to a max-
imum of 2,5 bar in exceptional cases!
During the heating process the pressing power can in-
crease owing to the thermal expansion of the air. This is
quite normal and does not make any intervention of the
operator necessary.
5.5
Adjusting the temperature control unit and heating the splice
Attention
The operator is responsible for the input of the correct splicing parameter.
Operational controls and displays of control unit
1
2
3
4
5
6
7
8
9
10
Maschinenbau GmbH
