Operating instruction: O003 / 5759
Edition: 04/2019
Reproduction, duplication of this document - even a partial form –
are subject to our permission. All rights reserved.
In this data sheet any liability for changes, errors or misprints is excluded.
15
4.7
Air cooling system
The heating plates together with the belting material are cooled down with air. For this purpose
some ventilators located at the bottom part of the heating press are blowing cooling air over the
heating plates following to the preheating and holding-down processes in order to cool down the
press.
The openings for the air input, or, air output may not be covered avoiding any negative impact on
the cooling capacity.
Once the preset cooling temperature has been reached the ventilators are automatically disconnect-
ing again and the process is completed.
Warning
Following to the cooling process residual heat may still remain in the press
Please do touch the heating press only on the permitted spots.
The press is only transportable after the cooling process has been accomplished!!
