MSA SUPREMATouch MCP 20, Руководство по эксплуатации

Страница: 32 / 241

32
Entering System Parameters
GB
SUPREMATouch
Information Subwindow
The Information subwindow contains general data on the selected input.
Sensor Data Subwindow
The Sensor data subwindow contains settings for the sensor at the selected input.
Fig. 16 “Sensor data” subwindow
Field Field Type Function
Tag
text, 10 characters;
empty by default
Enter a customer specific designation for the selected input
Marking
text, 20 characters;
empty by default
Enter a customer specific description for the selected input.
Sensor
Serial No. text, 10 characters;
empty by default
Enter serial number of the input device for the selected input.
Installation
Area text, 20 characters;
empty by default Enter a customer specific description of the installed location
of the input device for the selected input.
Field Field Type Function
Sensor Type
Selection,
empty by
default
Contains a list of supported input device types.
Set the type of device used for the selected input.
Range
Selection,
default: 100
Contains a list of supported measurement ranges.
Set the measurement range that applies for the selected input.
Dimensions
Selection,
default: %LEL
Contains a list of supported measurement dimensions.
Set the measurement dimension for the selected input.
Meas. Gas
Selection,
empty by
default
Contains a list of supported gases.
Set the gas to be measured with the sensor for the selected
input.
Zero Gas
Selection,
empty by
default
Contains a list of ‘Zero’ gases used to calibrate the zero-point of
the gas sensors.
Set the zero gas that will be used to calibrate the gas sensor for
the selected input.
(Zero Gas)
Valve No.
Selection,
empty by
default
Contains a list of available outputs that can be used as zero gas
valve output.
This valve will be used during the calibration of the input. If no
valve should be used, select
free .