mru SWG 100 biogas, Руководство пользователя

Страница: 69 / 141

MRU GmbH SWG 100 User Manual
Page 69 of 141
For devices with just one measuring point the switching is additional possible with
the arrow keys up / down.
Change the displayed page
Use the arrow keys left / right can be changed in both display modes the page. The
new page number is displayed in the title bar for a moment just after the successful
change.
Change sampling point displayed
For analyzers with several measuring points can used the arrow keys up / down the
displayed (not measured) measuring point can be changed. In this way you can get
an overview very quickly over the last measured values for all points. In the
background, the analyzer uses the measurement cycle continues uninterrupted.
However, once a measurement phase is completed, the display automatically
switches to the actual measurement location.
Configuration of the measurement window (display content)
The measuring values selection and arrangement is user configurable in both
display modes.
Press the content menu key and select the function 'Define measuring window'. A
cursor (inverted line) will appear. The cursor can be moved with the arrow keys up
and down. The arrow keys left and right will change the measuring value in the
selected line. When the cursor is moved over the top or under the bottom line, then
the next definable page will show up.
As soon as you have finished the configuration, press the ESC key (or press again
the menu key and select the function 'Save measuring window'). You will be asked,
whether the changed settings shall be stored or discarded. Select 'keep them' in
order to store your changes.