mru SWG 100 biogas, Руководство пользователя

Страница: 124 / 141

MRU GmbH SWG 100 User Manual
Page 124 of 141
2. Open the path Extras/General settings, at the analyzer. Push
F3=Modbus
.
At this menu the Modbus slave parameters can be configurated.
Example:
Baud rate: 19200
Slave address: 238
Stop bits: 1
Parity: even
Data bits: 8
Picture: The screenshot shows an example of a Modbus slave settings.
3. In the next step it is necessary to build a connection between the analyzer
and the network. To do this open the browser at a pc and open the
webserver with the address:
•
http://192.xxx.xxx.xxx/maintenance/index.html
Important
With the test modus for the alarm outputs of the IO module, the alarm
relays at the IO modules and the relay at the PCB mainboard can be
activated.
Important
The 192.xxxx.xxx.xxx is the IP-address, which is configurated at the
module (see chapter xx).
Example:
The IP-address of the module is 192.168.100.154, then the correct address to invoke
the webserver is:
http://192.168.100.154 /maintenance/index.html.
4. The webserver-address is protected with a password. The default password
is:
a. Username: admin
b. Password: admin.
5. The following screen appears.