mru SWG 100 biogas, Руководство пользователя

Страница: 42 / 141

MRU GmbH SWG 100 User Manual
Page 42 of 141
•
List of the installed alarmoutput ports (1): At this list the operator can
select, which alarm output should be configured.
•
Details (2):
Here the operator can open the configuration screen for the
selected alarm output. To open the details-menu, push
F1
or
OK
.
•
Auto configuration (3): If the operator pushes this key ( F2 ) the output pins
would be configured by default values.
•
Test (4):
The test-menu is for testing the alarm outputs. To open the test-
menu, push
F3
or
OK
.
+
The settings for an alarm-
menu. See the screenshot below.
o
Section (1): Shows the operator, which
alarm-output will be change.
o Sample point (2):
The operator can select
the sample point. This means, that the
alarm-output signal from the choose
sample point will be transmitted to the
process control system.
o
Meas. Item (3): At this point the operator
selects the measurement item, which
should be monitored. At the chart below,
the typical measurements items are
counted.
Basically, all measurement-
channels, which can be measured, can be
selected at this point.
o
Meas. Unit (4): This point shows, which unit
the transmit signal have. This point cannot
be changed.
o
Threshold (5):
Here the threshold will be
determined.
o
Alarm of value is (6): The operator can
determine, if the alarm will be triggered
above
the determine threshold, or
below
the threshold.
o
Return (7):
Leave the menu. Alternate push
F1.
For
navigation
and selection
1
2
3
4
5
6
7