MROTEK PINE-16M, Руководство по настройке

Страница: 56 / 100

4.9 Configuration of Central Site Switching of PINE-16M
4-40
Command Description
Config
Enter the global configuration mode.
loopback-detection
(enable|disable) To enable or disable the loop detection function
loopback-detection port-list
(PORTLIST|all) Configures the port list for loop detection
show loopdetection
Shows the information of current global loop detection.
Example
: Enable the loop detection function. Carry out loop detection on port 1-4.
Mro-tek#
config terminal
Configuration mode, one command input per time. End with CTRL-Z.
Mro-tek(config)#
loopback-detection
enable
Set Successfully.
Mro-tek(config)#
loopback-detection port-list
1-4
Set Successfully.
Mro-tek(config)#
show loopdetection
loopback detection enabled
hello time: 4
down time: 30
detection port: 1 2 3 4
loopback detected for each port
port 1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 3: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 5: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 6: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 7: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 8: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 9: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 10: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 11: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 12: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 13: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 14: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 15: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 16: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
port 17: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0