4.9 Configuration of Central Site Switching of PINE-16M
4-31
portid = 8, rate = 262144, status = 0, type = disable
portid = 9, rate = 262144, status = 0, type = disable
portid = 10, rate = 262144, status = 0, type = disable
portid = 11, rate = 262144, status = 0, type = disable
portid = 12, rate = 262144, status = 0, type = disable
portid = 13, rate = 262144, status = 0, type = disable
portid = 14, rate = 262144, status = 0, type = disable
portid = 15, rate = 262144, status = 0, type = disable
portid = 16, rate = 262144, status = 0, type = disable
portid = 17, rate = 262144, status = 0, type = disable
portid = 18, rate = 262144, status = 0, type = disable
portid = 19, rate = 262144, status = 0, type = disable
Mro-tek(config-eswif/0/1)#
Storm control rate
Users can define a threshold limit (in kbps) for starting the storm control function.
Command Description
config
Enter the global configuration mode.
interface switchport
<1-19>
To select a specific switch port
Storm-control rate
<62-262144>
Set up storm control rate.
show storm-control
Shows the storm control setting of all switching ports.
Since the real storm-control threshold is not a continual value, the configured threshold may not be equal
to the real threshold. In general, the real storm-control threshold is the closest value to the configured
threshold.
Example
: Setting the threshold for starting the storm control to 100kbps.
Mro-tek#
config terminal
Configuration mode, one command input per time. End with CTRL-Z.
Mro-tek(config)#
interface switchport
1
Mro-tek(config-eswif/0/1)#
storm-control rate
100
Set Successfully.
Mro-tek(config-eswif/0/1)#
show storm-control
portid = 1, rate = 100, status = 100, type = broadcast
portid = 2, rate = 262144, status = 0, type = disable
portid = 3, rate = 262144, status = 0, type = disable
portid = 4, rate = 262144, status = 0, type = disable
portid = 5, rate = 262144, status = 0, type = disable
portid = 6, rate = 262144, status = 0, type = disable
portid = 7, rate = 262144, status = 0, type = disable
portid = 8, rate = 262144, status = 0, type = disable
Содержание PINE-16M
