manualshive.com logo in svg

MPE DP SERIES II, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
MPE DP SERIES II Скачать руководство пользователя страница 97

4.3.12.7 NET:PORT (Optional Ethernet only)

This command sets the Socket (Port) of the Ethernet module of the power supply.  
The factory default port setting is 50505.  The factory recommends port values greater than 49151
to avoid conflicts with registered Ethernet port functions.

Command Syntax: 

[SYSTem][:COMMunicate]:NETwork:PORT <integer > 

Parameters: 

16-bit socket number (1 to 65,535)

Examples: 

SYSTem:COMM:NET: PORT 50505
NET: PORT 50505

Query Syntax:

[SYSTem][:COMMunicate]:NETwork:PORT? 

Returned Parameters:  <integer>

Related Commands:  NET:MAC, NET: ADDR, NET:GATE, NET:SUBN, NET:HOST, 
NET:DHCP

4.3.12.8 NET:HOST? (Optional Ethernet only)

This query reads the host name of the Ethernet communications module.

Command Syntax:

none

Query Syntax: 

[SYSTem][:COMMunicate]:NETwork:HOSTname? 

Parameters: 

none

Examples: 

SYST:COMM:NET:HOST?
NET:HOST?

Returned Parameters:  <string> 

Related Commands:  NET:MAC, NET: ADDR, NET:SUBN, NET:PORT, NET:DHCP

4.3.12.9 NET:DHCP (Optional Ethernet only)

       
This command sets the DHCP operating mode of the Ethernet module.  If DHCP is set to 1, the
module will allow its IP address to be automatically set by the DHCP server on the network.  If 
DHCP is set to 0, the IP address is set according to Section 4.3.12.4.  The factory DHCP setting is
1.

Command Syntax: 

[SYSTem][:COMMunicate]:NETwork:DHCP <NR1>

Parameters: 

0 = DHCP Off; 1= DHCP On

84

Содержание DP SERIES II


















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды