manualshive.com logo in svg

MPE DP SERIES II, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
MPE DP SERIES II Скачать руководство пользователя страница 137

approximately 4 seconds.  Observe that the LAN LED rapidly flashes and after 4 seconds,
release the LAN Reset button.  The LAN configuration password will be reset to blank and
the module will be set to DHCP/Auto-IP enabled.

B.3.2 Discovery

The Ethernet module supports the VXI-11 discovery protocol allowing the device to be
discovered on the network by software such as National Instruments' Measurement &
Automation Explorer, Agilent Connection Expert, or the Remote Interface Software
supplied with the power supply.

B.3.2.1 Discovery using NI Measurement & Automation Explorer

To access discovery with NI Measurement & Automation Explorer, the NI-VISA add-on
module must be installed along with the standard software package.  Start NI Measurement
& Automation Explorer, right-click on Devices and Interfaces, and then select "Create
New…" Select "VISA TCP/IP Resource" from the list.  Click Next and then select Auto-
detect of LAN Instrument.  Click Next and the software will scan the local network for VXI
devices and display them for configuration for further usage with NI-VISA and related
software.

B.3.2.2 Discovery using Agilent Connection Expert

To access discovery with Agilent Connection Expert, start Agilent Connection Expert. 
Select your computer's LAN interface and then click the Add Instrument button at the top of
the screen.  The software will scan the local network for VXI devices and display them for
configuration for further use with Agilent VISA compatible software.

B.3.2.3 Discovery using the Remote Interface Software

If DHCP is off and the address is unknown, the device can be located using the Remote
Interface Software supplied with the power supply.  To access discovery, press Find Device
in the Communication Setup menu.  The routine scans all the devices on the network and
provides their addresses and identifications.  Select the desired device and press OK; this
automatically changes the address in the Communication Setup.  The same result can be
achieved with a double click on the desired device.  After communications is established,
the address of the device may be changed by pressing Change Device’s Settings. 

B.3.3 Web Interface

To access the web server, first determine the module's IP address via one of the discovery
methods described in Section B.3.2.  Alternatively, if the host computer supports NetBIOS
over TCP/IP, you may use the device's NetBIOS name instead of the IP address.

124

Содержание DP SERIES II


















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды