MOTU micro express-USB, Руководство пользователя

Страница: 31 / 156

W O R K I N G W I T H P R E S E T S
29
For the micro express, input 1 is routed to outputs
1-3. Input 3 is routed to outputs 4-6.
For the Express XT, input 1 is routed to outputs
1-4. Input 5 is routed to outputs 5-8.
MIDI Machine/for the Express XT
This preset provides MIDI data, time code, and
MIDI Machine Control settings for using MIDI
Machine Control between devices without a
computer.
Inputs 1-4 are reserved for non-MMC devices
being routed to outputs 1-5, as well as the
computer.
Input 5 is also routed to the computer but not to
any of the MIDI outputs.
MIDI outputs 6, 7 and 8 are reserved for MIDI
Machine devices, as these ports are programmed
to receive MIDI Time Code and MMC transport
commands from the MIDI Express XT.
MIDI inputs 6, 7 and 8 are intended for MMC
controller devices, and they are each programmed
slightly differently to accommodate three different
scenarios. Input 6 routes MIDI data only to outputs
6, 7 and 8. Input 7 routes MMC to the MIDI
Express XT only. Input 8 does a combination of
inputs 6 and 7.
MIDI Machine/for the micro express
This preset provides MIDI data, time code, and
MIDI Machine Control settings for using MIDI
Machine Control between devices without a
computer.
Inputs 1-2 are reserved for non-MMC devices
being routed to outputs 1-4, as well as the
computer.
Input 3 is also routed to the computer but not to
any of the MIDI outputs.
MIDI outputs 5 and 6 are reserved for MIDI
Machine devices, as these ports are programmed
to receive MIDI Time Code and MMC transport
commands from the micro express.
MIDI inputs 3 and 4 are intended for MMC
controller devices, and they are each programmed
slightly differently to accommodate several
different scenarios. Input 3 routes MMC to the
micro express only. Input 4 routes MIDI data only
to output 6.
Direct
This preset causes your Express interface to
function like a simple 1 IN/8 OUT or 1 IN/ 6 OUT
MIDI interface, respectively. All of the extra
routing, merging, muting, rechannelizing, and
running status features are disabled. Your Express
interface applies no processing whatsoever to
MIDI data as it is sent to and from the computer.
This mode is referred to as
Direct Connect mode
through this manual.
Input 1 connects to the computer, and the
computer connects to all 8 (or 6) outputs. But none
of the inputs are connected directly to the outputs.
This preset can be used effectively to solve
problems with non-standard MIDI data transfers.
For example, some samplers transmit sample
dumps in a way that won’t work when your Express
interface’s MIDI processing features are enabled.
This mode disables the processing features, which
solves the problem. If you experience trouble with
sysex, try this preset.
☛
Express Console cannot communicate with
your Express interface when it is in Direct mode.
To restore communications, use the front panel
controls to choose another preset.
!USB Interfaces Manual Book Page 29 Tuesday, October 10, 2000 12:43 PM